Step 1 –delete the existing code of our remote duplicator
1)Click and Hold A and B buttons together - Led will flash 3 times
2)Keep holding A button and release B button
3)Keep holding A button and push B button 3 times, Led will start flashing Non-stop
Now press any key on the remote control, LED lights are not bright, so delete code success; if you press the button LED lamp is lit, indicating that the original code is not deleted!
Step 2 - clone you're original remote
1)Put both remotes Into back to Back position. Make sure they have direct contact
2)Click and hold 1 button on your original remote and 1 button on your clone remote. Keep holding until led will make 2 blinks then 3 blinks then goes into Steady and you have successfully cloned. ( the left keys follow the same above operation)
If for some reason the clone does not go further then 2 blinks, it means the signal does not go through, please shift the remote slowly up and down until you get the point where it will go through.
Use this cloning duplicator remote control key fob to duplicate your existing remote controllers for cars, car sunroofs, garage doors, rolling gates, heating systems, wireless anti-theft device, home automation, etc. Don't worry about the privacy and safety. It adopts one-to-one key copy technology and the password of each key is saved individually. High transfer sensitivity, no signal blocking. It can bring you much convenience in your daily life. With a continuous repeat of one million times lifespan, the copy transmitter switch is durable. You can take it anywhere easily with keychain design.
Main Features: ●Good privacy with high accuracy and high efficiency, one-to-one key copy ● High transfer sensitivity, no signal blocking, the control range of 50m ●Long lifespan of a continuous repeat of one million times ● Small size with keychain design for good portability ● Suitable for cars, car sunroofs, garage doors, rolling gates, heating systems, wireless anti-theft device, home automation, etc.